Pipes & Tubes

SPAR produce now a high quality laser welded tubes from 0.19 mm to 152.4 mm diameter, and various other sizes of Round Tubes, Square Tubes, Rectangular Tubes that can be used for any application requiring the greatest performance,

Scaffolding Tubes

Scaffolding tubesare supplied in HR (Black) & Galvanized type, mainly 3.2mm and 4.0mm thickness with standard specification EN 39, EN 10219, BS1139

Strip Width Tube Nominal Value (Type 4) Nominal Value (Type 3) Tolerances
Wall thickness 4 3.2 -10% 61
Outside diameter(mm) 48.3 48.3 ± 0.5 mm 61
Inside diameter, (mm) 40.3 41.9 61
Mass (Kg/m) 4.37 3.56 -7.50% 61

Round Tubes

Round Tubes are supplied in HR (Black), Galvanized (Hot-Dip) or Pre-galvanized types Can be use in structural and fencing application, Produced from ½' to 6" inch different thickness.

Square Tubes

Square Tubes are supplied only in HR (Black) & Pre-Galvanized type. Can be used in structural, Furniture and other commercial application. Produced with various other sizes and thicknesses, from 16mm x 16mm to 120mm x 120mm

Rectangular Tubes

Rectangular Tubes are supplied only in HR (Black) & Pre-Galvanized type. Can be used in structural, Furniture and other commercial application Produced with different sizes and thicknesses from 20mm x 15mm to 100mm x 60mm